PM05 peristaltic pump

{tab=Features}

PM 05

The PM 05 peristaltic pump can be used as an automated dispenser, diluter or a general purpose pump for culture media, broths or solvents. It can also be used as a stand alone pump or it conveniently connects to the XY500 or any media preparator. The PM 05 is microprocessor controlled to save up to 20 dispense or dilution programs. Pump calibration is automatic and calibration data can also be saved with each program.

Operation is manual or automatic; enter the quantity of doses to be dispensed and the interval delay time. Dispense volume from 1.0-9999 ml per dose. Interval delay time can be set from 0.1-99.9 seconds. Pump precision of +/- 0.1 ml for doses up to 20 ml (+/- 1%>20 ml). A stand-by mode keeps the culture media re-circulating, thus keeping the media in suspension.

The PM 05 has a special anti-drip feature, reversible pump direction capability and includes footswitch and one complete, autoclaveable tubing set. The PM 05 can accommodate various tubing sizes from 1.6-8.2 mm.

PM05 shown with XY500 Robotic Module

{tab=Literature}

PM05 Brochure

{tab=Specs}

{tab=Accessories}

PM 05 Accessories

Standard tubing set 3.2mm

Standard pre-cut tubing 3.2mm (5 pc.)

Complete tubing set 1.6mm (standard)

Pre-cut tubing 1.6mm (5 pc.)

Complete tubing set 4.8mm

Pre-cut tubing 4.8mm (5 pc.)

Complete tubing set 6.4mm

Pre-cut tubing 6.4mm (5 pc.)

Stainless steel connectors used to join tubing (2 per pack)

Foot switch

{tab=Related Products}

You may also be interested in this/these product(s):

Perimatic Robot Automates the filling of a wide range of containers in conjunction with the Perimatic range of liquid dispensers. Adjustable legs allow tubes up to 200mm in height. The system can be programmed to memorize up to 99 fill patterns; racks must be filled on

Dilumat 4 Automates dilution process by accurately dispensing a volume of diluent based upon the desired final dilution and the weighing of the sample to be diluted. The Dilumat 4 is complete with a fully automated, articulate arm and the ability to store 20 diffe

XY500 Automates the filling of tubes, bottles (200mm maximum height), impedance cells, etc…Works in conjunction with the PM 05 peristaltic pump via RS232 interface, can fill two racks of 252 tubes each in the same cycle and can store up to 20 different programs

Masterclaves Microprocessor controlled media sterilizer; available in 9 and 28 liter sizes. Real time cycle print out via optional ticket printer, dispensing via peristaltic pump, supplement addition port, magnetic stirrer.