D2D Series

Chamber Size

Loading Capacity

Equipped with the same state-of-the-art technology as ourV&D series autoclaves, the D2D has the same modern design but now with two doors for fitting between separating walls. The autoclaves are specially designed for gas-tight fitting to separating walls. The installation area comprising all technical components is located on the external, non-sterile side with a natural environment. Operation, however, can be carried out from both sides, the position (open or closed) of the opposite door being indicated on the display.

For use under the most stringent clean room and safety conditions:

-For biological safety laboratories. Fitting as a sterilization and double-door (pass-through) lock for protecting the external environment

-For clean rooms in laboratories and production facilities as a sterilization and double-door lock separating sterile and non-sterile areas.

Triple Safety Aspects!

-Only one door can be opened at a time. If one door is open, the other is automatically locked. (Images with both doors open are for demonstration and display purposes only)

-If the autoclave is switched off or if no current is available (power failure) both doors remain locked.

-If the door at the non-sterile side is opened, a sterilization program has to be run before the door at the sterile side can be opened.

The locking system can be adapted to customer's preferences. Doors and control panel are made of heat-insulating plastic, the housing completely of stainless steel and the edges chamfered for smooth junctions with walls.

Equipped with the same state-of-the-art technology as our V&D series autoclaves, the D2D has the same modern design but now with two doors for fitting between separating walls.

Features:
Innovative automatic safety door lock.

Easy and safe. When the lid is closed, the lid is automatically locked by a circumferential ring system. A special lip seal made of heat resistant silicone provides reliable sealing. As steam pressure builds the seal becomes tighter. The lid also opens easily – either at the push of a button or automatically at the end of a sterilization cycle.
The door-locking system is temperature dependent and adheres to national and international safety standards. The door remains locked as long as there is excess pressure in the chamber. The lid, like other parts of the pressure vessel and housing, is made of stainless steel. The modern design faceplate, which also contains the control panel, display and part of the control technology, is made of heat resistant and insulated plastic. There is no risk of the operator coming into contact with hot components.

Pressure-safe up to 5 bar/150 °C.
Tomorrow’s process requirements are addressed in today’s design!
The Systec V-Series autoclaves are the first of its kind t o be designed for higher pressures and temperatures. The standard pressure chamber is designed for 5 bar/150 °C. If the expanded pressure and temperature model is selected as an option, all control and safety components are adapted to the
higher temperature and pressure. This option may be retrofitted to existing V- series autoclaves.

Systec V-Series autoclaves are equipped direct from the factory for sterilization
temperatures up to 140 °C and 4 bar of pressure.

Controls – new generation.
Microprocessor and software
The Systec V-Series autoclaves have “comprehensive intelligence”: Pressure is controlled via an electronic pressure transducer. Additionally, there is a flexible temperature sensor in the sterilization chamber or in a reference vessel (for liquids) and another sensor at the coldest part of the chamber, the condensate outlet. The microprocessor, specially developed for our laboratory autoclave, controls all relevant functions such as steam pressure, temperature and sterilization time as well as optional rapid cooling, pre / post-vacuum and drying.

Menu-presented instructions in easy to read text form.Membrane keyboard with acoustic confirmation signal. Ergonomically located in a logical and easy tooperate position.

Design – pure innovation!

Steam generation!
A steam generator is incorporated in the housing providing substantial benefits:

– No heating elements and no reservoir for dirty water in the chamber
– With stand-by pre-heating option, only 10 min. heating time to 121° C with an empty chamber
– Improved removal of air from the empty chamber via pulsed heating (rapid attainment of optimal steam atmosphere, even without a vacuum)
– Accuracy better than ± 0.3 C with empty chamber
– Quicker cooling as neither hot water in the chamber nor the separate steam generator need be cooled
– After cooling, steam is immediately available for the next sterilization run.

Further standard features:
– Flexible temperature sensor PT-100 for a reference vessel
– Medium temperature triggering of sterilization time
– Autofill – automatic filling with demineralized water feed for steam generation
– Start by clock – timer for programming starting time
– Collecting point for all outlet pipes
– Venting valve
– Baseplate in the chamber for vessels, baskets etc.
– Validation port

PT-100 temperature sensor

Condensation instead of steam removal!
Exhaust steam is condensed automatically via a PT 100-regulated cooling system. This prevents odors and protects waste water piping.
Quality materials quality manufacturing!
The pressure v essel is made of corrosion-resistant electro-polished stainless steel 1.4571 (V4A) AISI 316 Ti and therefore very easy to clean. Autoclave framework and housing are also made of stainless steel. The highly efficient, high-quality Hanno-Tect insulation material releases no particles and therefore the Systec V-Series is ideal for use in clean room environments.

Printer for documentation

Print program type, batch number, date, time, temperature, pressure and sterilization phase for total traceability

PC software

For documentation during sterilization program. Download and save all cycle information.

Additional use for service and diagnosis of instrument electronics.

Stainless Steel Wire Mesh Basket

Used for sterilizing liquids, open containers, non-waste materials

Stainless Steel closed basket for waste sterilization

Used for waste sterilization